Makita TD 171 Color Impact Drivers 18v 2019 Best Model bODY oNLY LXT. 4 x speed - 8 x functions - 4 x different functions for screwing - fast turn - slow - self drill screws - long screws!! Special switch button change quick 4 speed in the front where is usually the LED for the old models show in the pictures!!
New impact driver released in late winter 2019. "Battle Mode Switch Hand Button" Newly Installed.+ Left and Right 2 LED Lights. + Bit Run out Reduction. + Easy Mode Evolution makes it even easier to use. Maximum tightening torque (N · m): 180.
Tightening capacity (mm) Small screw: M4 M8, bolt: M5 M16. High strength bolt: M5 M14, Course thread: 22 125mm. Rotation speed (rotation / min) Fastest. 0 to 3600 / strong: 0 to 3200 / medium: 0 to 2100 / weak: 0 to 1100 / wood: 0 to 1800 /.
0 to 3600 / for tex (thin plate): 0 to 3600 / for tex (thick plate): 0 to 3600. Number of hits (times / min) Fastest. 0 to 3800 / strong: 0 to 3600 / medium: 0 to 2600 / weak: 0 to 1100 / wood: 0 to 3800 /.Bolt (For forward use): 0 to 3800 / for tex (thin plate): Stop immediately after batting / for text (thick plate): 0 to 2600. Overall length (head part length, mm): 116.
Mass (kg): 1.5 (Battery: BL 1860 B installed). Double ball bearings are adopted for bearing parts! It greatly reduces the runout when using a long bit, and it has durability that is strong against the harshness at the time of tightening.
Various modes available in the scene. Batting mode + Raku 4 modes. Strike mode 4 step change: fastest · strong · medium · weak.Supports from tightening of power. Speed preferential tightening to delicate tightening such as small screws.
Wood mode: Start slowly "slowly". With trigger fully open, fasten with automatic speed change "fastest" at a stretch. Bolt mode For normal rotation: Instantaneously fastest with trigger ON. Reverse rotation: When the nut loosens, automatic stop.
Text mode (Thick plate mode): Reduce screw head skipping and coming out. Text mode (thin plate mode): Automatic stop after detection of blows after screw penetration. Batting Mode Switching Hand Button.
Switching the batting mode while holding the grip. Fastest strong medium weak fastest.
One mode you use frequently can be registered. If you press the hand button, you can quickly switch between "the mode you were using just before" and "the mode you registered"! Two left and right LED light attachment. It is difficult to be bitten or scratched like a bit or a screw. Quick charger (DC 18 RF): New and optimum charging control shortens charging time!Battery status during charging · Ambient temperature etc. Are further reflected in charge control. Practical charging (up to about 80% or more): about 27 minutes / full charge (100% full charge): about 40 minutes. Caution Only for mark battery. Smartphone or the like can charge (USB).
"Large capacity" small item storage with storage. Simply lock the lid by raising the handle. Prevent erroneous opening of lid with base claw. Dust proof and drip-proof specification (APT). The item "MAKITA TD171 Color B.
Less LXT 18v Impact Driver Double LED Best World Model 2019" is in sale since Thursday, April 11, 2019. This item is in the category "Business, Office & Industrial\Power Tools\Drills\Drills\Cordless Drills". The seller is "dimdim_tcxz1" and is located in Pinner. This item can be shipped worldwide.